第7代智能感应自动打蜡系统

❈ PRODUCT DESCRIPTION

Machine property

• ◪1.The sensor can recognize the height of Nozzle and align the rubber mold to the Nozzle precisely.

• ◪2.The chip-free bar code can also be used to set the parameters of the systemto mix the film with the chip film.

• ◪3.Manipulator is compatible with rubber mold in size : 11CM*10.5CM*5.5CM.

• ◪4.Counter-top is wider and longer, allowing the operator to have more space, and the leg support can be folded to 65cm high.

• ◪5.Touch screen is increased to 10 inch wide with LED at the bottom, to make operator easily scrutinize and check the wax mold quality.

• ◪6.LED on belt conveyor make the counter-top lighter and reduce the eyes fatigue.

• ◪7.No chip pressure segment number: 3 sets can be set, the three groups according to the color fast switching.( Upgrade 9 stage pressure).

• ◪8.New manipulator can manually adjust the center pointefore and after the die.

  Parameters 

【voltage:】220V 
【power:】400W-600W 
【frequency:】50HZ 
【overall size:】172CM*92CM*116CM
【Rubber mold size range:】Min：6CM*3.5CM*1CM ; Max：11CM*10.5CM*5.5CM
【G.W :】220KG
【wax injection parameters :】A. clamp pressure: 50-400PA ;B. injection pressure: 20-250Pa; C. vacuum time : 0-100S, D. injection time : 0.5-100S ;E. Cooling time

❈ NEW CONFIGURKTION

•  

  1.Adding wax cylinder up and down automatic lifting function: It can automatically identify and adjust the height of the wax nozzle (nozzle) to make the film accurately aligned.

•  

  2.Using RFID (wireless communication chip) technology, the computer automatically recognizes the parameters of the film, the chip can be recycled indefinitely.

•  

  3.New sectional air pressure function: It can be upgraded from three-stage air pressure to nine-stage air pressure, and can simultaneously inject nine different air pressure adhesive films.

•  

  4.Using condensate recovery technology, no drainage, cooling and power saving, is a must-have model for rapid production.

01

Counter top

The counter top widened to 172CM

02

New function

New function:wax pot can be lift up and down

03

Manipulator

Manipulator adjust the centre point of rubber  mold by moving forward and backward

04

Touch screen

10 inches touch screen in Chinese and English

05

New cooling system

New cooling system:New sub-section air pressure function

06

Belt chain plate

Rubber mold size mix: 6cm*3.5cm* 1cm
Rubber mow size max: 11cm*10.5cm*5.5cm

Standard configuration

• ◪1.1 wax pot.

• ◪2.One 10 inch wide touch screen( Led light at the bottom),both Chinese and English version available.

• ◪3.one clamp.

• ◪4.one computer host( including belt conveyor, high gloss counter-top, foldable leg support).

• ◪5.one set cooling system with LED.

• ◪6.2 white fluorescent (with bulbs).

• ◪7.80pcs chips, 4 nozzle beads, 4 brass mold.

❈ TECHNICAL DATA

❈ DRAWING AND SIZE